Your DEEPWORK deserves regular cleaning too. The good news is that you don't need any special cleaning products. Standard cleaning products that you already use in your office or at home will do the job perfectly.
The exterior panels, floor and seating are made from lacquered wood. To clean these surfaces, simply use a soft cloth and a multi-purpose cleaner. Avoid abrasive materials, such as the rough side of a sponge, as they may damage the finish.
The wooden door handle is best cleaned and maintained with a wood care product. For the desk surface, a standard multi-purpose cleaner is perfectly suitable.
The door is made of glass. For the best results, clean it with a standard glass cleaner.
The interior walls are covered with felt. To remove dust and dirt, use a vacuum cleaner on a low setting. If you need to remove stains, use a well-wrung damp cloth and gently wipe the surface. Avoid scrubbing too hard, as this could damage the material. If you use water during cleaning, we recommend leaving the booth door open for a while afterwards so that any remaining moisture can dry properly.