Door is too hard or too easy to close

The door of your DEEPWORK should open and close smoothly.

If it doesn't, the most likely cause is the two small round latches that hold the door in place when closed and release it when opened. These latches can be adjusted easily.

To do this, follow the steps below:

1. Get the right tool
   You will need a very small flat-head screwdriver.
2. Locate the opening in the latch
   The small latches can be rotated and have a tiny hole at one position. Inside this hole is a screw that you need to reach with the screwdriver. It can be a little tricky to find at first, but with a few attempts you should be able to locate it.
3. Adjust the latch
   Turning the latch to the left makes it extend further out, which makes the door harder to open and close. Turning it to the right retracts it further into the frame, which makes the door easier to open and close. Make sure to adjust both latches.
4. Test the door
   Open and close the door a few times to find the setting that works best for you.

Watch the video guide

Were you able to solve the problem? Great.

Is the door still not closing properly?
Get in touch with us via our contact form and we'll be happy to help you find a solution.